When taking part in gas oven installation and maintenance, there are several things that need to be taken into consideration to make sure gas installation and maintenance is done safely and properly. Our Gas Cooker Installers specialists always make sure when doing gas oven installation and maintenance, that all gas and electric powers connected to the gas oven that is going through installation and maintenance is switched off at the mains to stop any possible danger occurring to the gas installer. After this step in gas installation and maintenance is completed, the gas oven will need to be placed near the cabinet space where the installation and maintenance process will take place. After this part of gas installation and maintenance is completed, check to see if the wiring of the oven that is going through installation and maintenance can reach the electrical junction box and gas connector.
Whilst dealing with the gas wiring in gas installation and maintenance, the gas connector of the gas oven that is going through installation and maintenance needs to be firmly connected to the gas line. Our engineer will do this by screwing the gas line of the gas oven that is going through installation and maintenance together with the house’s gas line. Our Gas Cooker Installers workers always use a wrench when working on this part of gas installation as the connection needs to be tight in order to prevent a gas leak.
Appropriate checks will be made in order to check for a gas leak during gas installation and maintenance, this is done by brushing a solution over the gas connection of the gas oven that is going through installation and maintenance and the gas then turned back on. If the solution bubbles, there is a gas leak that needs to be corrected during gas installation and maintenance. A gas leak during gas oven installation and maintenance can usually be amended by tightening the two gas lines. Gas Cooker Installers engineers are more than qualified to deal with all sorts of gas installation issues, so you should call us on 0208 906 7577 or 03333 200 484 for a highly professional gas installation.
To maintain a gas installation, Gas Cooker Installers engineers always make sure when gas installation maintenance is being carried out, that the following things are inspected: the light bulb; which should be replaced by a 40 watt bulb if needed, the gas oven door during maintenance; which needs to be checked to ensure no heat escapes it, the oven knobs; to see if markings have been removed and if they need to be cleaned, and a general clean should be done to the gas installation during maintenance. Cleaning a gas oven installation during maintenance should be done with a non-abrasive cleaner to maintain the gas oven’s look.
